Time Recorder
Z120

How many times did your employees turn punch cards back and forth because inserting the wrong side or to see punch records on the other side of the card? You do NOT need to check the back side of cards using the Z120 with our new monthly time card “Form M”. You can see whole records of the work period at a single glance. Z120 and the monthly time card “Form M” saves cost and offers ease of use!!

Time recording device Z120

z150The Z120 is a time recorder / punch clock for working time recording on a new monthly stamp card with 6 columns / 31 rows (weekly and 2-weekly cards also available) to simplyfy the punch clock operation and following payroll work.

Features:

  • Work time registrations in 6 columns and 31 rows on single sided stamp card "Type M"
  • Up to 3 IN- / OUT-registrations per day (total of 6 punches) in hours and minutes.
  • Time registration without arithmetic function with simple time card type "SEIKO M".
  • Illuminated display with display of time, date, day of week and print column indication.
  • Automatic card feeder.
  • Fully automatic summer / winter time changeover can be programmed.
  • Immediately ready for operation after power connection, date retention even during a power failure.

Functions and programming:

The following functions can be set:

  • Time registration in hours and minutes, or 1/100 hrs.
  • Identification of core time injuries.
  • Day advance time can be set at any one time (set at the factory to 5.00).
  • Automatic summer / winter time changeover (DST).
  • Core time violation or early IN/OUT can be printed with a special mark.
  • Special programs can be set for Sat./Sun..
  • In conjunction with the new stamp card type "M", registration of IN / OUT times in 6 columns without calculation function.
  • Payroll options:
    - monthly (factory set)
    - weekly
    - 2-weekly.
  • Time display in 12- or 24-hour clock.
  • Backlit display and Control Panel.
  • The print column can be selected automatically via timetable programm and otherwise via push buttons. The button "Overwrite" is for clocking out after a night shift. After pushing it the OUT punch will be stamped in the previous day row - last position.
  • Display reads:
    - Day of the week Mo. - So.
    - Day of month 1 - 31
    - Time and summer / winter time mark
  • The Z120 is equipped with a potential free contact and can be used for controlling a signal relay or signal generator.
  • The unit has a self-diagnostic function and reports errors in the electronics or mechanics section by showing the respective error number in the display.